Product Description
The μs-series 1x2 solid-state fiber optical switch connects optical channels by redirecting an incoming optical signal into a selected output optical fiber. The switching of the optical light is realized by utilizing Faraday Effect.
This is achieved using a patent protected non-mechanicalconfiguration with solid-state all-crystal design whicheliminates the need for mechanical movement. Theμs-series fiber optic switch is designed to meet the mostdemanding switching requirements of reliability, durability,response, and continuous high frequency switching operation.
Features
No moving parts,best durability
Ultra fast switching speed
Extremely stable latching mode
Easy to route -all fibers on sameside
Exceptional reliability and stability
Applications
Optical switching
High speed protection
System monitoring
Test & measurement
Fiber-opticssensingsystem
Specifications
Item | Unit | Parameters | Notes | |
Unidirectional | Bidirectional | |||
Wavelength Range | nm | 1310or1550 | Other band optional | |
Insertion Loss | dB | 0.8 (Typ.);1.2(Max.) | 0.9(Typ.);1.4(Max.) | |
PDL | dB | 0.1 (Typ.); 0.2 (Max.) | 0.1 (Typ.); 0.3(Max.) | |
Return Loss | dB | ≥40 (Typ 50) | ≥30 | |
Cross-talk | dB | ≥40 (Typ 50) | ≥30 | |
PMD | ps | 0.2 | ||
Repeatability | dB | +/- 0.01 | ||
Durability | cycles | Regular (>100Billions), Ultra-fast (>1000Billions) | ||
Switching Speed | μs | Regular (50~200); Ultra-fast (2~10) | Other speed optional | |
Operating Temperature | P0PC | -45~85 | ||
Storage Temperature | P0PC | -40~85 | ||
Maximum Optical Power | mW | 500 | High power optional | |
Dimension( L×W×H ) | mm | 32.8x8× 7(±0.2) | （含端帽51.8x8x7） | |
Dimensions Drawing (mm)
Electrical Specifications
Parameters | Specifications | Unit | |
Regular | Ultra-fast | ||
Switching Speed | 50~200 | 2~10 | μs |
Switching Voltage (VCC) | 3(+/-5%) | 5~7.5 | V |
Switching Current | < 100 | < 350 | mA |
Driving Mode | Voltage or Pulse Driving | Pulse Driving | NA |
Pulse Width (typical) | 1000 | 50 | μs |
Claim Frequency | <800 | < 3000 | Hz |
Notes:
l Puoao provides optional switch driving board at additional charge;
l It is recommended to use Puoao’s switch driving board for the Ultra-fast switch;
l To avoid damaging the Ultra-fast switch, Puoao recommends to set the current limit below 800mA when the power supply voltage is set at 6.0V~7.0V.
l The switching speed measured by Puoao company is between 2-5US at working voltage of 7.5V and current of 350MA
UnidirectionalPin Definition
Pin1 | Pin2 | The Optical OutputPort |
1(Voltage = VCC) | 0(Voltage = GND) | IN OUT1 |
0(Voltage = GND) | 1(Voltage = VCC) | IN OUT2 |
BidirectionalPin Definition
Pin1 | Pin2 | The Optical OutputPort |
1(Voltage = VCC) | 0(Voltage = GND) | IN OUT1 |
0(Voltage = GND) | 1(Voltage = VCC) | IN OUT2 |
Ordering Information:HC-ZMS- A-B-C-D-E-F-G(Example: HC-ZMS-1112110)
ZMS- | A | B | C | D | E | F | G |
Working Mode | Switching Speed | Operating Wavelength | Fiber Tuber | Fiber Length | Fiber Type | Connector Type | |
1.Regular 2.Bidirectional
| 1.50~200us 2.5~20us 3. Others | 1.1310nm（±20） 2.1550nm（±20） 3.1585nm（±20） 4. C & L Band 5. Others
| 1.250μm fiber 2. 900μm fiber 3. Others | 1.0.5 +/- 0.1 m 2. 1.0 +/- 0.1 m 3. Others | 1.SMF-28 2.50/125MM 3.62.5/125MM 4.80um细径 5.Others | 0.No Connector 1. FC/UPC 2. FC/APC 3. SC/UPC 4. SC/APC 5. LC/PC 6. MU/PC 7. Others |
CN
EN