Product Description
The 4X4 fiber optic switch connects optical channels by directing or blocking an incoming optical signal into the output fiber. This is achieved using a patent pen- ding op to-mechanical configuration and activated via an electrical control signal. Latching version preserves the selected optical path after the drive signal has been removed, while the non-latching versions default to either the open or closed state when power is removed. The switch has integrated electrical position sensors. The new material based advanced design significantly reduces moving part position sensitivity, offering unprecedented high stability as well as unmatched low cost.
Features
Unmatched Low Cost
Low Optical Distortions
High Isolation
High Reliability
Epoxy-Free Optical Path
Applications
Channel Blocking
Configurable Add/Drop
System Monitoring
Instrumentation
Specifications
Parameters | Specifications | Unit |
Operating Wavelength | 1260~1620(SM)、850(MM) | nm |
Insertion Loss | ≤1.4 | dB |
Wavelength Dependent Loss | ≤0.40 | dB |
Polarization Dependent Loss | ≤0.05 | dB |
Temperature Dependent Loss | ≤0.20 | dB |
Return Loss | SM≥50 MM≥30 | dB |
Cross Talk | SM≥55 MM≥35 | dB |
Switch Time | ≤8 | ms |
Repeat ability | ≤±0.02 | dB |
Durability | ≥107 | times |
Operating Voltage | 3 or 5 | V |
Switch Type | Non-Latching/Latching | |
Operating Temperature | －20~＋70 | ℃ |
Storage Temperature | －40~＋85 | ℃ |
Optical Power | ≤500 | mw |
Dimension | 52.7L×37.2W×10.0H | mm |
Pin Configurations
Type | State | Electric Drive | Status Sensor | ||||||
4X4 | Pin 1 | Pin 5 | Pin 6 | Pin 10 | Pin 2-3 | Pin 3-4 | Pin 7-8 | Pin 8-9 | |
Latching | 0 | -- | -- | GND | V＋ | Close | Open | Open | Close |
1 | V＋ | GND | -- | -- | Open | Close | Close | Open | |
Non-latching | 0 | -- | -- | -- | -- | Close | Open | Open | Close |
1 | V＋ | -- | -- | GND | Open | Close | Close | Open | |
NO. | Optical Route | Relay | |||||
1 | 2 | 3 | 4 | 5 | 6 | ||
1 | A-1、B-2、C-3、D-4 | 1 | 1 | 1 | 1 | 1 | 1 |
2 | A-1、B-2、C-4、D-3 | 1 | 1 | 1 | 1 | 1 | 0 |
3 | A-1、B-3、C-2、D-4 | 1 | 1 | 1 | 1 | 0 | 1 |
4 | A-1、B-3、C-4、D-2 | 1 | 1 | 1 | 0 | 0 | 1 |
5 | A-1、B-4、C-2、D-3 | 1 | 1 | 1 | 1 | 0 | 0 |
6 | A-1、B-4、C-3、D-2 | 1 | 1 | 1 | 0 | 0 | 0 |
7 | A-2、B-1、C-3、D-4 | 1 | 1 | 0 | 1 | 1 | 1 |
8 | A-2、B-1、C-4、D-3 | 1 | 1 | 0 | 1 | 1 | 0 |
9 | A-2、B-3、C-1、D-4 | 1 | 1 | 0 | 1 | 0 | 1 |
10 | A-2、B-3、C-4、D-1 | 1 | 1 | 0 | 0 | 0 | 1 |
11 | A-2、B-4、C-1、D-3 | 1 | 1 | 0 | 1 | 0 | 0 |
12 | A-2、B-4、C-3、D-1 | 1 | 1 | 0 | 0 | 0 | 0 |
13 | A-3、B-1、C-2、D-4 | 1 | 0 | 1 | 1 | 0 | 1 |
14 | A-3、B-1、C-4、D-2 | 1 | 0 | 1 | 0 | 0 | 1 |
15 | A-3、B-2、C-1、D-4 | 1 | 0 | 0 | 1 | 0 | 1 |
16 | A-3、B-2、C-4、D-1 | 1 | 0 | 0 | 0 | 0 | 1 |
17 | A-3、B-4、C-1、D-2 | 0 | 0 | 1 | 0 | 0 | 1 |
18 | A-3、B-4、C-2、D-1 | 0 | 0 | 0 | 0 | 0 | 1 |
19 | A-4、B-1、C-2、D-3 | 1 | 0 | 1 | 1 | 0 | 0 |
20 | A-4、B-1、C-3、D-2 | 1 | 0 | 1 | 0 | 0 | 0 |
21 | A-4、B-2、C-1、D-3 | 1 | 0 | 0 | 1 | 0 | 0 |
22 | A-4、B-2、C-3、D-1 | 1 | 0 | 0 | 0 | 0 | 0 |
23 | A-4、B-3、C-1、D-2 | 0 | 0 | 1 | 0 | 0 | 0 |
24 | A-4、B-3、C-2、D-1 | 0 | 0 | 0 | 0 | 0 | 0 |
Mechanical Dimensions (Unit:mm)
Ordering Information HC-FSW-4×4-A-B-C-D-E-F-G
4×4 | A | B | C | D | E | F | G |
Type | Wavelength | Switch Type | Voltage | Fiber Type | Package | Fiber Length | Connector |
00=Special | 2=C+L 13=1310 14=1410 15=1550 A=1260-1610 9=1310/1550 8=850 00=Special | 1=Latching | 3=3V 5=5V | 1=SM28 5=50/125 6=62.5/125 00=Special | 1=Bare fiber 9=900um tube 00=Special | 25=0.25m 5=0.5m 1=1.0m 00=Special | 1=None 2=FC/PC 3=FC/APC 4=SC/PV 5=SC/APC 6=ST/PC 7=LC/PC 00=Special |
CN
EN