Description
The In-line Polarizer is designed to pass light with one specific polarization while blocking the other polarization. It can be used to convert unpolarized light into polarized light with high extinction ratio. It can also be used to enhance the extinction ratio of signals with its excellent polarization properties.
Features
High Extinction Ratio
Low Insertion Loss
High stability and reliability
Applications
Fiber Lasers
Optical Transmitters & Transceivers
Fiber Amplifiers
Fiber Sensors
Specifications
Parameters | Unit | Value | |
Center Wavelength (λc) | nm | 1310, 1550 | 1064 |
Operating wavelength range | dB | ±50 | ±30 |
Typ. Insertion Loss at Tr* | dB | 0.3 | 0.4 |
Insertion Loss at To* | dB | ≤0.5 | ≤0.6 |
Typical Extinction Ratio at Tr* | dB | 30 | 30 |
Extinction Ratio at Tr* | dB | ≥26 | ≥26 |
Return Loss | dB | ≥50 | ≥50 |
Power handling(CW) | mW | ≤300 | |
Tensile Load | N | ≤5 | |
Fiber Type | --- | PM 1310, 1550nm Panda Fiber | PM 980 Panda Fiber |
Input-output fiber option | --- | Option1: PM fiber-PM fiber | |
Operating Temperature | ℃ | -5 to +70 | |
Storage Temperature | ℃ | -40 to +85 | |
Remark
* Tr=Room temperature, To=Operating temperature.
* Above specifications are for device without connector.
* For devices with connectors, please refer to PM patchcord spec.
* The PM fiber and the connector key are aligned to the slow axis.(Default if customer no special request)
Ordering Information : HC-ILP-A-B-C-D-E-F
A | B | C | D | E | F | |
ILP | Wavelength range | Fiber option | Package | Pigtail Type | Length | Connector |
1064=1064nm 13=1310nm 15=1550nm S= Special
| 1=Option1 2=Option2 3=Option3
| 5535=5.5x35mm
| 0=Bare 1=0.9mm loose tube
| 0=0.5m 1=1m 1.5=1.5m S=special | 0=none 1=SC/PC 2=SC/APC 3=FC/PC 4=FC/APC S=Special |
CN
EN