Product Description
The N1x2 optical switch is connected to the optical path by connecting or blocking the optical signal. the switch has non-mechanical configurations and activated via an electrical control signal. Products are widely used in aerospace and military equipment.
Feature
Excellent optical performance
High-speed operation
High-reliability mechanism
All solid-state construction in a compact package
Application
Optical signal switching independent from data rate and data protocol
Network protection, restoration and performance monitoring
Instrumentation
Variable digital group delay
Medical, aerospace, and other manufacturing and industrial industries
Specifications
Parameters | Unit | Specifications |
Wavelength Range | nm | 1500 ~ 1600 |
Test Wavelength | nm | 1550 |
Insertion Loss 1, 2 | dB | ≤ 1.5 |
TDL | dB | ≤ 0.30 |
PDL | dB | ≤ 0.20 |
Return Loss | dB | ≥ 50 |
Crosstalk | dB | ≥ 18 |
Repeatability | dB | ≤ ±0.01 |
Switching Time | ns | ≤ 300 |
Durability | Cycles | ≥10 Billions |
Switch Type | NA | Non-Latching |
Maximum Optical Power | mW | ≤ 500 |
Operating Temperature | ℃ | -5 ~ +70 |
Storage Temperature | ℃ | -40 ~ +85 |
Dimension | mm | (L)34.0×(W)7.5×(H)7.5 ±0.2 |
Note: 1 Test at room temperature and SOP. 2 Excluding connectors, 0.2dB for one pair connectors. | ||
Dimension(mm)
Electrical Drive
Type | Status | Optical Route | Electric Drive | |
Pin 1 | Pin 2 | |||
N1x2 | Ⅰ | P1－P2 | V基础电压 | GND |
Ⅱ | P1－P3 | V驱动电压 | GND | |
备注：
V基础电压：持续给产品供电，电压值大概70~80V左右；
V驱动电压：通道切换电压，电压值大概180~190左右；
Functional Diagram
![QG{)WS48{8VV4)LRBKS}]KQ.png](/uploads/20221013/202210131344527026.png "QG{)WS48{8VV4)LRBKS}]KQ.png")
Ordering Information HC-OSW -1×2-A-B-C-D-E-F
A | B | C | D | E | F |
Switch Type | Fiber Type | Wavelength | Tube Type | Fiber Length | Connector |
B： Bidirectional | PM15：PM1550 | 1550：1550nm X：Others | 250：250um 900：900um X：Others | 05：0.5m±5cm 10：1.0m±5cm X：Others | OO：None FC：FC/PC FA：FC/APC SC：SC/PC SA：SC/APC LC：LC/PC X：Others |
CN
EN